THOMSON TG605s - Snmp Iflist

snmp Commands
808
E-DOC-CTC-20080409-0002 v2.0
snmp iflist
Display the SNMP interfaces.
SYNTAX:
snmp iflist [intf = <{loop|ethif1|ethif2|ethif3|ethif4|
ceoc|bridge|OBC|ethport1|RELAY|Internet_0_35|
eth-br-dsl|eth_wan1|eth_dmz1|eth_guest1|lan1|
wan1|dmz1|guest1}>]
where:
intf The name of an SNMP interface. OPTIONAL