THOMSON TG605s - Service System Modify

service Commands
E-DOC-CTC-20080409-0002 v2.0
793
service system modify
Modify a service.
SYNTAX:
service system modify name = <{PPTP|PPTPD|PPTPGRE|SNTP|SYSLOG|HTTP|
HTTPs|HTTPI|TFTP-C|FTP|SSH|SSDP|MDAP|CWMP-C|
CWMP-S|GRE|IPIP|IKE|IKE-NAT-T|ESP|RAS|SRAS|
IP_COMMANDS|PING_RESPONDER}>
[state = <{disabled|enabled}>]
[port = <{at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-
net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|...} or
number>]
[qoslabel = <{None|DSCP|Interactive|
Management|Video|VoIP-RTP|VoIP-Signal|
default}>]
[routelabel = <{None|DSCP|Interactive|
Management|Video|VoIP-RTP|VoIP-Signal|
default}>]
[srcintf = <{loop|ipsec0|lan1|wan1|dmz1|
guest1}>]
[log = <{disabled|enabled}>]
[forward = <{disabled|enabled}>]
[natpmweight = <number{0-255}>]
where:
name The name of the service. REQUIRED
state Disable/Enable this service. OPTIONAL
port The port of the service. OPTIONAL
qoslabel QOS label for service data. OPTIONAL
routelabel Route label for service data. OPTIONAL
srcintf The primary ip interface for this service. OPTIONAL
log Disable/Enable service logging. OPTIONAL
forward Disable/Enable service forwarding. OPTIONAL
natpmweight The nat portmap weight for this service. OPTIONAL