THOMSON TG605s - Service System List

service Commands
790
E-DOC-CTC-20080409-0002 v2.0
service system list
Display services.
SYNTAX:
service system list [name = <{PPTP|PPTPD|PPTPGRE|SNTP|SYSLOG|HTTP|
HTTPs|HTTPI|TFTP-C|FTP|SSH|statdns|custom|No-
IP|DtDNS|gnudip|DHCP-S|DHCP-R|SNMP_AGENT|SSDP|
MDAP|CWMP-C|CWMP-S|GRE|IPIP|IKE|IKE-NAT-T|ESP|
REM_UPD|RAS|SRAS|IP_COMMANDS|ICMP_PING|SENDTO|
PING_RESPONDER|ICMP_TRACEROUTE|UDP_TRACEROUTE|
HTTPPROBE}>]
[expand = <{disabled|enabled}>]
[dynamics = <{disabled|enabled}>]
[members = <{disabled|enabled}>]
[string = <string>]
[beginstring = <string>]
where:
name The name of the service. OPTIONAL
expand Expanded listing. OPTIONAL
dynamics Display dynamic sevices. OPTIONAL
members Display sevice group members. OPTIONAL
string String matching condition OPTIONAL
beginstring Beginstring matching condition OPTIONAL