THOMSON TG605s - Tod Schedule Modify

tod Commands
906
E-DOC-CTC-20080409-0002 v2.0
tod schedule modify
Modify schedule parameters.
SYNTAX:
tod schedule modify [expiretime = <string>]
[nrofminutes = <number>]
[count = <number>]
scheduleid = <number>
[mode = <{timerange|timeout}>]
[reference = <string>]
[name = <string>]
[action = <string>]
[state = <{enabled|disabled}>]
where:
expiretime The absolute expire time. OPTIONAL
nrofminutes The number of minutes. OPTIONAL
count The timer count (0=periodical) OPTIONAL
scheduleid The id of the schedule. REQUIRED
mode The mode. OPTIONAL
reference Access control reference. OPTIONAL
name Friendly name. OPTIONAL
action Action. OPTIONAL
state Enable/disable OPTIONAL