upnp Commands
934
E-DOC-CTC-20080409-0002 v2.0
upnp config
Config upnp parameter(s)
SYNTAX:
upnp config [maxage = <number{60-999999}>]
[writemode = <{full|natonly|readonly}>]
[safenat = <{disabled|enabled}>]
[preferredaddresses = <string>]
where:
maxage ssdp advertisements MAX-AGE (default = 1800) OPTIONAL
writemode Configuration access level for UPnP OPTIONAL
safenat Enable / disable check on safe nat entries
(limited to own host)
OPTIONAL
preferredaddresses CSV list of preferred ip addresses for UPnP (1
per lan ip-interface)
OPTIONAL
To Next Page
Loading...
