mbus Commands
654
E-DOC-CTC-20080409-0002 v2.0
mbus listobjects
Display the object instances
SYNTAX:
mbus listobjects [dmtree = <{igd|atomic|system}>]
[path = <quoted string>]
[type = <{indexpath|keystrpath}>]
[output = <{tree|list}>]
[showflags = <{disabled|enabled}>]
where:
dmtree Select mbusd datamodel tree. OPTIONAL
path Fully qualified mbus path to list. OPTIONAL
type Path type (default = indexpath) OPTIONAL
output List output type OPTIONAL
showflags Display object flags (Clean or Dirty / Persistent or
Volatile)
OPTIONAL
To Next Page
