THOMSON TG605s - Atm Oam CC Send

atm Commands
64
E-DOC-CTC-20080409-0002 v2.0
atm oam cc send
Send CC activate/deactivate to connection.
SYNTAX:
atm oam cc send port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
vpi = <number{0-31}>
[vci = <number{0-511}>]
[span = <{segment|end2end}>]
[action = <{activate|deactivate}>]
[direction = <{source|sink|both}>]
where:
port The ATM port number. REQUIRED
vpi The Virtual Path Identifier. REQUIRED
vci The Virtual Channel Identifier. OPTIONAL
span Send CC action end2end or segment. OPTIONAL
action The CC action. OPTIONAL
direction Source, sink or both (default: both). OPTIONAL