THOMSON TG605s - Snmp Commands

snmp Commands
E-DOC-CTC-20080409-0002 v2.0
795
snmp Commands
snmp community add Config an SNMP community string to
allow snmp access over IP.
see page 796
snmp community delete Delete an SNMP community string to
prevent snmp access over IP.
see page 797
snmp community list List all SNMP community strings in
use for snmp access over IP.
see page 798
snmp community modify Modify an SNMP community string to
allow snmp access over IP.
see page 799
snmp config Configure global SNMP parameters. see page 800
snmp get Get from supplied object identity. e.g.
get objectid=.1.3.6.1.2.1.1.1.0
see page 801
snmp getnext Get next from supplied object
identity. e.g. getnext objectid=
see page 802
snmp ifadd Create a new SNMP interface. see page 803
snmp ifattach Attach an SNMP interface. see page 804
snmp ifconfig Modify an SNMP interface. see page 805
snmp ifdelete Delete an SNMP interface. see page 806
snmp ifdetach Detach an SNMP interface. see page 807
snmp iflist Display the SNMP interfaces. see page 808
snmp walk Walk from supplied object identity.
e.g. walk objectid=.1.3.6.1.2.1.1
see page 809