THOMSON TG605s - Ipsec Connection Network Modify

ipsec Commands
E-DOC-CTC-20080409-0002 v2.0
577
ipsec connection network modify
Changes a network.
SYNTAX:
ipsec connection network
modify
name = <>
[type = <{address|subnet|range}>]
[ip = <quoted string>]
[proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|
pup|rdp|rsvp|tcp|udp|vines|xns-idp|6to4|ipip}
or number>]
[port [.] = <{at-echo|at-nbp|at-rtmp|at-zis|
auth|bgp|biff|bootpc|bootps|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|
imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|
kerberos|ldap|login|netbios-dgm|netbios-ns|
netbios-ssn|netwall|netware-ip|new-rwho|nfds|
nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|
smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-
net|sqlserv|sunrpc|syslog|systat|talk|...}
ornumber>]
where:
name The name of the network attribute to change. REQUIRED
type Address type OPTIONAL
ip IP information. OPTIONAL
proto The IP protocol. OPTIONAL
port [.] The TCP/UDP port. OPTIONAL