grp Commands
430
E-DOC-CTC-20080409-0002 v2.0
grp config
Set the grp configuration settings.
SYNTAX:
grp config [cdistance = <number{0-255}>]
[kdistance = <number{0-255}>]
[rdistance = <number{0-255}>]
[trace = <{disabled|enabled}>]
where:
cdistance Set the distance of the connected route type.
Default distance is 0.
OPTIONAL
kdistance Set the distance of the kernel route type. Default
distance is 1.
OPTIONAL
rdistance Set the distance of the RIP route type. Default
distance is 120.
OPTIONAL
trace Enable/Disable tracing. OPTIONAL
To Next Page
Loading...
