THOMSON TG605s - Ipsec Connection Modify

ipsec Commands
E-DOC-CTC-20080409-0002 v2.0
573
ipsec connection modify
Changes a connection profile.
SYNTAX:
ipsec connection modify name = <>
[peer = <>]
[localnetwork = <{retrieve_from_server|
black_ip}>]
[remotenetwork = <{retrieve_from_server|
allocated_virtual_ip|black_ip}>]
[alwayson = <{disabled|enabled}>]
[descr = <{AES_SHA1_TUN|AES_MD5_TUN|
AES_SHA1_PFS_TUN|AES_MD5_PFS_TUN|
DES_SHA1_TUN|DES_MD5_TUN|AES_SHA1_Adv_TUN|
NullEnc_SHA1_TUN}>]
[options = <>]
[state = <{disabled|enabled}>]
where:
name The name of the connection profile to change. REQUIRED
peer Peer gateway profile. i.e. the gate to talk to. OPTIONAL
localnetwork Local trusted network (either a network attribute
or a special keyword for dynamic cases)
OPTIONAL
remotenetwork Remote trusted network (either a network
attribute or a special keyword for dynamic cases)
OPTIONAL
alwayson Is this connection be on at all time, provided
IPSec is enabled?
OPTIONAL
descr Up to 4 phase two (IPSec) security descriptors
separated by |
OPTIONAL
options Connection options. OPTIONAL
state Enable/disable this connection profile. OPTIONAL