THOMSON TG605s - Ipsec Peer Subpeer Modify

ipsec Commands
606
E-DOC-CTC-20080409-0002 v2.0
ipsec peer subpeer modify
Configure a subpeer gateway profile.
SYNTAX:
ipsec peer subpeer modify name = <>
[localid = <Identity : format(type)value; type
being >]
[remoteid = <Identity : format(type)value;
type being >]
[phyif = <{lan1|wan1|dmz1|guest1|any}>]
[server = <>]
where:
name The name of the peer profile to change. REQUIRED
localid The ID by which the peer gate identifies this
gate.
OPTIONAL
remoteid The ID of the peer gate. OPTIONAL
phyif Interface this peer applies to. OPTIONAL
server VPN dialup server descriptor. OPTIONAL