THOMSON TG605s - Dsd Intercept Config

dsd Commands
240
E-DOC-CTC-20080409-0002 v2.0
dsd intercept config
Display/modify HTTP Intercept configuration
SYNTAX:
dsd intercept config [WDSpoofedIP = <ip-address>]
[servertimeout = <number>]
[connecterrorurl = <string>]
[categoryerrorurl = <string>]
[monitorintercepturl = <string>]
[unauthorizedrequrl = <string>]
[imageredirect = <{disabled|enabled}>]
[imageredirecturl = <string>]
[alwaysuseip = <{disabled|enabled}>]
where:
WDSpoofedIP IP address indicating unavailable WAN
connection.
OPTIONAL
servertimeout Server timeout for redirect action OPTIONAL
connecterrorurl Destination url when connection to server failed OPTIONAL
categoryerrorurl Destination url when connection to category
server failed
OPTIONAL
monitorintercepturl Destination url when request is intercepted by
monitor thread
OPTIONAL
unauthorizedrequrl Destination url when requested url is blocked by
some rule or setting
OPTIONAL
imageredirect Enable/disable substituting blocked images OPTIONAL
imageredirecturl URL of image used when substituting blocked
images
OPTIONAL
alwaysuseip Always use ip address when redirecting to a
local page
OPTIONAL