eth Commands
268
E-DOC-CTC-20080409-0002 v2.0
eth bridge config
Modify/Display the bridge configuration settings.
SYNTAX:
eth bridge config [brname = <{bridge}>]
[age = <number{10-1000000}>]
[filter = <{none|no_WAN_broadcast}>]
[vlan = <{disabled|enabled}>]
[precedencemap = <string>]
where:
brname The name of a bridge instance. OPTIONAL
age The lifetime (in seconds) of a dynamically
learned MAC address.
OPTIONAL
filter The bridge filter to be applied for all WAN bridge
interfaces.
OPTIONAL
vlan Enable/disable the use of the VLAN id of the
received VLAN packets.
OPTIONAL
precedencemap The IP QoS precedence mapping table. OPTIONAL
To Next Page
