system Commands
854
E-DOC-CTC-20080409-0002 v2.0
system config
Set or change system config parameters.
SYNTAX:
system config [upnp = <{disabled|enabled}>]
[tr64 = <{disabled|enabled}>]
[mdap = <{disabled|enabled}>]
[led = <{green|red|orange|flash|off}>]
[resetbutton = <{disabled|enabled}>]
[digestauth = <{disabled|enabled}>]
[defaultconnection = <{loop|lan1|wan1|dmz1|
guest1}>]
[autosave = <{enabled|disabled}>]
[autosavedelay = <number{0-600}>]
where:
upnp Enable/Disable upnp discovery OPTIONAL
tr64 Enable/Disable TR-64 discovery OPTIONAL
mdap Enable/Disable mdap discovery OPTIONAL
led Set system LED color OPTIONAL
resetbutton Enable/Disable reset-to-factory-defaults
pushbutton
OPTIONAL
digestauth Enable/Disable HTTP digest authentication OPTIONAL
defaultconnection The name of the default internet connection. OPTIONAL
autosave Enable/Disable autosaves OPTIONAL
autosavedelay Autosave delay in seconds (0 for immediate
save)
OPTIONAL
To Next Page
