THOMSON TG605s - Ip Commands

ip Commands
E-DOC-CTC-20080409-0002 v2.0
495
ip Commands
ip arpadd Add an entry to the ARP cache of a
broadcast IP interface.
see page 497
ip arpdelete Delete an ARP entry. see page 498
ip arplist Display the ARP cache. see page 499
ip auto flush Flushes autoIP interfaces. see page 500
ip auto ifadd Creates a new autoIP interface. see page 501
ip auto ifattach Select and assign a link-local address
to an autoIP interface.
see page 502
ip auto ifconfig Configures an autoIP interface. see page 503
ip auto ifdelete Deletes an existing autoIP interface. see page 504
ip auto ifdetach Release the link-local address for the
given autoIP interface.
see page 505
ip auto iflist Shows the autoIP interfaces. see page 506
ip config Display/Modify global IP stack
configuration.
see page 507
ip debug httpprobe Send HTTP probe to measure the
round trip time taken to connect and
access
see page 509
ip debug sendto Send UDP packets. see page 510
ip debug stats Display statistics. see page 511
ip debug traceconfig Display/Modify IP stack trace
configuration.
see page 512
ip flush Flush all static IP parameters.
Dynamic info (e.g. from PPP links)
remains.
see page 513
ip ifadd Create an IP interface. see page 514
ip ifattach Attach an IP interface. see page 515
ip ifconfig Modify an IP interface configuration. see page 516
ip ifdelete Delete an IP interface. see page 517
ip ifdetach Detach an IP interface. see page 518
ip iflist Display all IP interfaces. see page 519
ip ifwait Wait for a status change of an IP
interface.
see page 520