THOMSON TG605s - Service System Mapadd

service Commands
E-DOC-CTC-20080409-0002 v2.0
791
service system mapadd
Add a port map for a service.
SYNTAX:
service system mapadd name = <{PPTP|HTTP|HTTPs|HTTPI|FTP|SSH|TELNET|
DNS-S|SNMP_AGENT|SSDP|MDAP}>
intf = <{loop|ipsec0|lan1|wan1|dmz1|guest1}>
port = <{at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-
net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|...} or
number>
where:
name The name of the service for this map. REQUIRED
intf The interface for this map. REQUIRED
port The port for this map. REQUIRED