THOMSON TG605s - Ipsec Connection Advanced Modify

ipsec Commands
E-DOC-CTC-20080409-0002 v2.0
565
ipsec connection advanced modify
Changes a connection profile.
SYNTAX:
ipsec connection advanced
modify
name = <>
[peer = <>]
[localnetwork = <{retrieve_from_server|
black_ip|from_initiator}>]
[remotenetwork = <{retrieve_from_server|
allocated_virtual_ip|black_ip|
from_initiator}>]
[localmatch = <{exactly_|one_of_|subnet_of_|
subrange_of_|black_ip}>]
[remotematch = <{exactly_|one_of_|subnet_of_|
subrange_of_|black_ip}>]
[localselector = <>]
[remoteselector = <>]
[alwayson = <{disabled|enabled}>]
[descr = <{AES_SHA1_TUN|AES_MD5_TUN|
AES_SHA1_PFS_TUN|AES_MD5_PFS_TUN|
DES_SHA1_TUN|DES_MD5_TUN|AES_SHA1_Adv_TUN|
NullEnc_SHA1_TUN}>]
[options = <>]
[state = <{enabled|disabled}>]
where:
name The name of the connection profile to change. REQUIRED
peer Peer gateway profile. i.e. the gate to talk to. OPTIONAL
localnetwork Local trusted network (either a network attribute
or a special keyword for dynamic cases)
OPTIONAL
remotenetwork Remote trusted network (either a network
attribute or a special keyword for dynamic cases)
OPTIONAL
localmatch Phase 2 responder side localid matching OPTIONAL
remotematch Phase 2 responder side remoteid matching OPTIONAL
localselector Local traffic selector for this profile OPTIONAL
remoteselector Remote traffic selector for this profile OPTIONAL
alwayson Is this connection be on at all time, provided
IPSec is enabled?
OPTIONAL
descr Up to 4 phase two (IPSec) security descriptors
separated by |
OPTIONAL
options Connection options. OPTIONAL