THOMSON TG605s - Mlp Privilege Addzone

mlp Commands
678
E-DOC-CTC-20080409-0002 v2.0
mlp privilege addzone
Add a zone to a privilege.
SYNTAX:
mlp privilege addzone name = <>
zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/
Local|r_lan|r_wan|r_fs_view|r_certificates|
r_remote_mgnt|r_local|r_qos|w_lan|w_wan|
w_fs_passive|w_rtg|w_fwdg|w_nat|w_frwl_norm|
w_frwl_adv|w_frwl_ss|w_ipsec|w_certificates|
w_remote_mgnt|w_local|w_qos|SND_lan|SND_wan|
SND_local|AND_lan|AND_wan|AND_frwl|AND_local|
User_Admin|MLP_Admin|secure_ipsec_term|
secure_BR|CLI|CGI|FTP|MDAP|secure_reset|
GUI_advanced|mbus|unsecure_connection|
Sensitve_file|...}>
where:
name Privilege name. REQUIRED
zone Zone name. REQUIRED