snmp Commands
E-DOC-CTC-20080409-0002 v2.0
805
snmp ifconfig
Modify an SNMP interface.
SYNTAX:
snmp ifconfig intf = <{loop|ethif1|ethif2|ethif3|ethif4|
ceoc|bridge|OBC|ethport1|RELAY|Internet_0_35|
eth-br-dsl|eth_wan1|eth_dmz1|eth_guest1|lan1|
wan1|dmz1|guest1}>
[securityname = <{RWCommunity|ROCommunity}>]
[communityname = <password>]
where:
intf The name of the SNMP interface to configure. REQUIRED
securityname Configure access rights/restrictions control for
the community name.
OPTIONAL
communityname Configure SNMP community name. OPTIONAL
To Next Page
