THOMSON TG605s - Eth Filter Template Rulemodify

eth Commands
E-DOC-CTC-20080409-0002 v2.0
347
eth filter template rulemodify
Modify an operand rule from a filter.
SYNTAX:
eth filter template rulemodify filter = <{}>
ruleid = <{}>
[operand = <{}>]
[negate = <{disabled|enabled}>]
[order = <number{-100-100}>]
[operator = <{Ignore|AND|OR}>]
where:
filter The name of an filter. REQUIRED
ruleid The name of the operand to remove. REQUIRED
operand The name of the operand to connect with. OPTIONAL
negate negate or not the operand outcome. OPTIONAL
order The operand order in thes filter (lower order is
processed first = priority)
OPTIONAL
operator Operand operator. OPTIONAL