THOMSON TG605s - Mbus Client Config

mbus Commands
E-DOC-CTC-20080409-0002 v2.0
641
mbus client config
Modify client parameters
SYNTAX:
mbus client config [writelock = <{enabled|disabled}>]
[wlgetimeout = <number>]
[wlidletimeout = <number>]
[path = <quoted string>]
[type = <{indexpath|keystrpath}>]
[id = <number>]
where:
writelock Get/release mbus writelock OPTIONAL
wlgetimeout Writelock get timeout in seconds (forever=-1,
*default=nowait=0)
OPTIONAL
wlidletimeout Writelock idle timeout in seconds (forever=-1,
*default=30)
OPTIONAL
path Fully qualified mbus path OPTIONAL
type Path type (default = indexpath) OPTIONAL
id sessionid to use OPTIONAL