THOMSON TG605s - Dhcp Relay Ifconfig

dhcp Commands
156
E-DOC-CTC-20080409-0002 v2.0
dhcp relay ifconfig
Configure a relay interface.
SYNTAX:
dhcp relay ifconfig intf = <{guest1|dmz1|wan1|lan1|ipsec0}>
[relay = <{disabled|enabled}>]
[maxhops = <number{0-16}>]
[remoteid = <password>]
[trusted = <{disabled|enabled}>]
where:
intf The name of the relay interface to configure. REQUIRED
relay Set the relay status. OPTIONAL
maxhops Set the maximum number of hops allowed in
the DHCP packet.
OPTIONAL
remoteid Set the remote id as specified in RFC3046. OPTIONAL
trusted Drop/Forward DHCP request packet when a relay
agent info option is present and the giaddr field
is 0 (RFC3046).
OPTIONAL