THOMSON TG605s - Firewall Level Modify

firewall Commands
E-DOC-CTC-20080409-0002 v2.0
415
firewall level modify
Modify a security level.
SYNTAX:
firewall level modify name = <security level name>
[index = <number>]
[readonly = <{disabled|enabled}>]
[udptrackmode = <{strict|loose}>]
[service = <{disabled|enabled}>]
[proxy = <{disabled|enabled}>]
[text = <quoted string>]
[policy = <{default|drop|accept}>]
where:
name The name of the security level to modify. REQUIRED
index The index of this security level. OPTIONAL
readonly Select whether the security level is readonly. OPTIONAL
udptrackmode Select UDP connection tracking mode. OPTIONAL
service Enable/Disable service definitions for this
security level.
OPTIONAL
proxy Enable/Disable proxy system services for this
security level.
OPTIONAL
text The description of this security level. OPTIONAL
policy Select default policy of this security level. OPTIONAL