eth Commands
376
E-DOC-CTC-20080409-0002 v2.0
eth switch qos weights
Configure the queue weights.
SYNTAX:
eth switch qos weights queue0 = <number{0-100}>
queue1 = <number{0-100}>
queue2 = <number{0-100}>
queue3 = <number{0-100}>
where:
queue0 Weight of queue 0 in WFQ (in %). REQUIRED
queue1 Weight of queue 1 in WFQ (in %). REQUIRED
queue2 Weight of queue 2 in WFQ (in %). REQUIRED
queue3 Weight of queue 3 in WFQ (in %). REQUIRED
To Next Page
Loading...
