expr Commands
E-DOC-CTC-20080409-0002 v2.0
397
expr list
List expressions.
SYNTAX:
expr list [name = <{_intf_0|_intf_1|_intf_2|_intf_3|
_intf_4|_intf_5|DHCP-R_if_0|wan|TELNET_if_0|
DNS-S_if_0|PING_RESPONDER_if_0|MDAP_if_0|
SSDP_if_0|GRE_if_0|IPIP_if_0|PPTPD_if_0|
PPTPGRE_if_0|_addr_127_0_0_1|_addr_10_0_0_138|
_addr_192_168_1_254|_addr_192_168_2_254|
_addr_192_168_3_254|private|ssdp_ip|mdap_ip|
IKE-NAT-T_sv_0|ESP_sv_0|IKE_sv_0|DHCP-R_sv_0|
icmp|igmp|ftp|telnet|http|httpproxy|https|RPC|
NBT|SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|
pop3s|smtp|ssh|dns}>]
[type = <{intf|ip|serv|mac}>]
[format = <{pretty|cli}>]
[string = <string>]
[beginstring = <string>]
where:
name The name of an expression to list. OPTIONAL
type The type of an expression. OPTIONAL
format The format of the expression list. OPTIONAL
string String matching condition OPTIONAL
beginstring Beginstring matching condition OPTIONAL
To Next Page
Loading...
