THOMSON TG605s - Mlp Role Addpriv

mlp Commands
684
E-DOC-CTC-20080409-0002 v2.0
mlp role addpriv
Add a privilege.
SYNTAX:
mlp role addpriv name = <{Administrator|LAN_Admin|PowerUser|
root|SuperUser|TechnicalSupport|User|
WAN_Admin}>
access = <{anyaccess|AP1|AP2|AP3|AP4|AP5|AP6|
AP7|AP8|AP9}>
service = <{anyservice|SP1|SP10|SP11|SP12|
SP13|SP14|SP15|SP16|SP17|SP18|SP19|SP2|SP3|
SP4|SP5|SP6|SP7|SP8|SP9}>
where:
name Role name. REQUIRED
access Access privilege to add. REQUIRED
service Privilege name to add. REQUIRED