THOMSON TG605s - Ip Debug Traceconfig

ip Commands
512
E-DOC-CTC-20080409-0002 v2.0
ip debug traceconfig
Display/Modify IP stack trace configuration.
SYNTAX:
ip debug traceconfig [input = <{none|label|-telnet|-host|-
broadcast|all}>]
[forward = <{none|label|-telnet|-host|-
broadcast|all}>]
[output = <{none|label|-telnet|-host|-
broadcast|all}>]
[drop = <{none|label|-telnet|-host|-broadcast|
all}>]
[path = <{none|label|-telnet|-host|-broadcast|
all}>]
[mode = <{line|dump}>]
[arp = <{none|all}>]
where:
input Define the packets that will be traced. OPTIONAL
forward Define the packets that will be traced. OPTIONAL
output Define the packets that will be traced. OPTIONAL
drop Define the packet drops that will be traced. OPTIONAL
path Define the packet that will be path-traced. OPTIONAL
mode Packet dump method. OPTIONAL
arp Define the arp packets that will be traced. OPTIONAL