THOMSON TG605s - Eth Bridge Vlan Ifconfig

eth Commands
E-DOC-CTC-20080409-0002 v2.0
315
eth bridge vlan ifconfig
Modify bridge interface from virtual LAN.
SYNTAX:
eth bridge vlan ifconfig name = <{default|wan|dmz|guest}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|Internet_8_35|Internet_0_35|eth-br-
dsl}>
untagged = <{disabled|enabled}>
where:
name The VLAN name. REQUIRED
intf The bridge interface from the VLAN to configure. REQUIRED
untagged Enable/disable interface as untagged for this
VLAN.
REQUIRED