config Commands
94
E-DOC-CTC-20080409-0002 v2.0
config load
Load saved or default configuration.
SYNTAX:
config load [load_ip = <{enabled|disabled}>]
[defaults = <{disabled|enabled}>]
[flush = <{enabled|disabled}>]
[echo = <{disabled|enabled}>]
[filename = <string>]
where:
load_ip Load IP settings or not. OPTIONAL
defaults Load default instead of saved configuration. OPTIONAL
flush Flush current configuration before loading new
one.
OPTIONAL
echo Echo each command string when loaded. OPTIONAL
filename Configuration filename. OPTIONAL
To Next Page
Loading...
