THOMSON TG605s - Ppp Bundle Config

ppp Commands
728
E-DOC-CTC-20080409-0002 v2.0
ppp bundle config
Modify the configuration of a bundle
SYNTAX:
ppp bundle config name = <{}>
[class = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|
15}>]
[pool = <{none}>]
[epdtype = <{null|localaddr|ipv4|globalmac}>]
[epdlocaladdr = <string>]
[epdglobalmac = <hardware-address>]
[epdipv4 = <ip-address>]
[mrru = <number{293-8192}>]
[ssnhf = <{disabled|enabled}>]
[laddr = <ip-address>]
[raddr = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[format = <{cidr|dotted|none}>]
[primdns = <ip-address>]
[secdns = <ip-address>]
[dnsmetric = <number{0-100}>]
where:
name The name of the bundle REQUIRED
class The prio class of the PPP packets. OPTIONAL
pool Acquire IP subnet and assign it to a free DHCP
pool.
OPTIONAL
epdtype Specifies the address space used to identify the
endpoint
OPTIONAL
epdlocaladdr Specifies the serial device number used as
endpoint discriminator
OPTIONAL
epdglobalmac Specifies the MAC address used as endpoint
discriminator
OPTIONAL
epdipv4 Specifies the IPv4 address used as endpoint
discriminator
OPTIONAL
mrru Negotiate maximum reassembled packet size we
can handle.
OPTIONAL
ssnhf Try to negotiate short sequence number header
format
OPTIONAL
laddr Negotiate this IP address at our side of the link. OPTIONAL