snmp Commands
E-DOC-CTC-20080409-0002 v2.0
803
snmp ifadd
Create a new SNMP interface.
SYNTAX:
snmp ifadd intf = <string>
dest = <{loop|ethif1|ethif2|ethif3|ethif4|
ceoc|bridge|OBC|ethport1|RELAY|Internet_0_35|
eth-br-dsl|eth_wan1|eth_dmz1|eth_guest1|lan1|
wan1|dmz1|guest1}>
where:
intf The name for the new SNMP interface. REQUIRED
dest The destination interface for this SNMP
interface.
REQUIRED
To Next Page
Loading...
