THOMSON TG605s - Ip Config

ip Commands
E-DOC-CTC-20080409-0002 v2.0
507
ip config
Display/Modify global IP stack configuration.
SYNTAX:
ip config [forwarding = <{disabled|enabled}>]
[redirects = <{disabled|enabled}>]
[checkoptions = <{disabled|enabled|
transparent}>]
[netbroadcasts = <{disabled|enabled}>]
[ttl = <number{0-255}>]
[fraglimit = <number{1-1024}>]
[defragmode = <{disabled|enabled}>]
[addrcheck = <{off|own|static|dynamic}>]
[mssclamping = <{disabled|enabled}>]
[natloopback = <{disabled|enabled}>]
[arpclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|
14|15}>]
[loadbalancing = <{disabled|roundrobin}>]
[bitrate-window(sec) = <number{10-3600}>]
[acceleration = <{disabled|enabled}>]
where:
forwarding Disable/Enable IP routing functionality. OPTIONAL
redirects Disable/Enable sending of ICMP redirect
messages.
OPTIONAL
checkoptions Disallow/Allow packets with IP options. OPTIONAL
netbroadcasts Disallow/Allow net directed broadcasts. OPTIONAL
ttl Set the default time-to-live for locally generated
IP packets.
OPTIONAL
fraglimit Set the maximum number of IP fragments
waiting for completion. (Avoids buffer
depletion).
OPTIONAL
defragmode Disallow/Allow defragmenting IP fragments. OPTIONAL
addrcheck Sets the level of ip address checks. OPTIONAL
mssclamping Disable/Enable mss clamping for low mtu
interfaces.
OPTIONAL
natloopback Disable/Enable NAT loopback. OPTIONAL
arpclass The prio class of the ARP packets. OPTIONAL
loadbalancing Select loadbalancing mechanism OPTIONAL