THOMSON TG605s - Page 554

ipsec Commands
554
E-DOC-CTC-20080409-0002 v2.0
ipsec connection start Manually start negotiation for a
connection.
see page 582
ipsec connection stop Manually stop a connection. see page 583
ipsec debug syslog Enable/disable VPN informational
syslog messages
see page 584
ipsec debug traceconfig Set trace detail see page 585
ipsec flush Flushes IPSEC configuration. see page 586
ipsec peer add Adds a peer gateway profile. see page 587
ipsec peer auth add Adds an authentication group. see page 588
ipsec peer auth delete Deletes an authentication group. see page 589
ipsec peer auth list List authentication groups. see page 590
ipsec peer auth modify Changes an authentication group. see page 591
ipsec peer delete Deletes a peer gateway profile. see page 592
ipsec peer descriptor add Adds a phase 1 (IKE) security
descriptor.
see page 593
ipsec peer descriptor delete Deletes a phase 1 (IKE) security
descriptor.
see page 594
ipsec peer descriptor list List phase 1 (IKE) security descriptors. see page 595
ipsec peer descriptor modify Changes a phase 1 (IKE) security
descriptor.
see page 596
ipsec peer list List peer gateway profiles. see page 597
ipsec peer modify Changes a peer gateway profile. see page 598
ipsec peer options add Adds a peer options group. see page 599
ipsec peer options delete Deletes a peer options group. see page 600
ipsec peer options list List peer options groups. see page 601
ipsec peer options modify Changes a peer options group. see page 602
ipsec peer subpeer add Adds a subpeer gateway profile. see page 603
ipsec peer subpeer delete Deletes a subpeer gateway profile. see page 604
ipsec peer subpeer list List subpeer profiles. see page 605
ipsec peer subpeer modify Configure a subpeer gateway profile. see page 606
ipsec show all Display all information see page 607
ipsec show cli Display all information in CLI format see page 608