113
BEFORE REQUESTING SERVICE
"Packing mode is fin-
ished.Please turn off the
device."
Indicates that the packing operation is completed. Switch off the
machine.
"First Octet is 1 - 223
Range"
Displayed when the first octet of IP address, default gateway, pri-
mary DNS server or secondary DNS server is set to a value out of
the specified input range.
"Value is irregular.
Input valid value"
Displayed when the octet is set to a value out of the specified input
range. Enter a value within the input range.
"The IP address is 0 - 255
Range"
Displayed when the subnet mask is set to a value off the input rule.
Enter a value within the input rule.
"At least 3 characters are
required for operator ID
prefix."
Displayed when the input examiner ID prefix is less than 3 charac-
ters. Enter a prefix with 3 characters.
"Incorrect password" Displayed when the password inputted to select a special mode is
incorrect.
"Please don't place the
face on the chinrest, to pre-
pare for next measure-
ment."
Displayed to confirm whether to place the face on the chinrest or
not, because the measuring head shall move to the "stand by
mode" position of the initial setting.
To Next Page
Loading...
