The OnEscape event is triggered if an object is open for input and the user pressed the
Escape key to cancel the input.
Allowed actions:
·
Execute Script
·
Jump To Page
·
Set Value
OnGetValue
This event is currently not supported.
OnValueChangeByOwner
This is a variable event. It is triggered as soon as the owner of the variable writes a new
value to the variable. This event can be set in the Variable Manager
Allowed actions:
·
Set Value
·
Scale Value
·
Execute Script
OnValueChangeRequest
This is a variable event. It is triggered as soon as anyone that is not the owner of the
variable tries to set a new value.
Allowed actions:
·
Set Value
·
Scale Value
·
Execute Script
OnValidStateChange
This is a variable event. It is triggered as soon as the validity status of the variable changes,
i.e. the variable goes invalid from valid or vice versa.
Allowed actions:
·
Set Value
·
Execute Script
Various actions can be assigned to an event. See above for what action can be configured
for which event.
No Action
This is the default setting for any event. To select an action, open the drop-down menu and
select one of the available actions. To disable the current action, choose No Action.
Please note that when No Action is selected, all settings of the previously selected action
are removed.
Execute Script
To Next Page
Loading...