The id of deleted control objects will be set to "-1.” Of course it is also possible to add /
register a control object again.
Restrictions for the registration of new control objects:
- Only objects which are included in the multimedia player component can be registered.
- The object which is to be registered must contain all required events, because the default
events/actions will be registered again.
(e.g. it is also possible to register an arched bargraph object as volume bar instead the
default linear bargraph object, because both objects have the "OnValueChange" event)
Hint: If the assignment of the new control object fails, the last valid id will retain
The group “Multimedia Player Controls” includes the following properties:
The following events can be configured for the multimedia player object:
·
OnPress
·
OnRelease
See here for the descriptions of all event and possible actions that can be assigned.
What video and audio codecs are supported?
Video
The following video codecs have been verified on the device:
·
H264 - MPEG-4 AVC (part 10) (avc1)
·
MPEG-1/2 Video (mpgv)
·
Motion JPEG Video (MJPG)
·
Google/On2's VP8 Video (VP80)
To Next Page
Loading...