711
OPUS Projektor Manual
Miscellaneous
In this screen two DM1 tests can be performed.
Send Example 1 will send an error to the OPUS device and let one lamp blink slowly.
Send Example 2 will send a different error to the OPUS device and let all lamps blink fast.
Please note that the errors will disappear after 1 second. DM1 messages have to be sent
every 1 s which is why the buffer is automatically cleared after 1 second.
Back returns to the J1939 menu.
Service Project -> CAN -> J1939 -> PGN Test
To Next Page
Loading...