e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
9 - 12
9.1.11 Hard disk (HDD) (e-STUDIO5560C/6560C/6570C)
(1) Take off the rear cover.
P. 4-7"4.1.18 Rear cover"
(2) Disconnect 2 connectors [1].
Notes:
Be sure to unlock the connector located on
the rear side by pinching the hooks [2] at the
both ends before pulling it out upward.
Fig. 9-33
(3) Loosen 2 screws [1]. Remove 4 screws [2]
and take off the hard disk.
Fig. 9-34
(4) Remove 1 screw and the ground wire [1].
(5) Remove 1 screw.
Fig. 9-35