5
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SELF-DIAGNOSTIC MODE
5 - 33
5.13 List print mode (9S)
5.13.1 Operation procedure
[ 1 ] Print out
[ 2 ] CSV output (USB)
Notes:
Precautions when storing information into USB media
• When storing the setting information of the equipment into a USB media, be sure to obtain
permission from a user in advance.
• When storing the setting information of the equipment into a USB media, the information is
printed out in a CSV format. Handle and manage the information with extra care.
• Do not lose or leak the setting information of the equipment.
• Do not use the setting information of the equipment for purposes other than maintenance or
product services.
• Provide the information promptly if a user requires so.
• The buttons on the control panel keep blinking while data are being stored in the USB media.
Do not disconnect the USB media while data are being stored.
[9][START]
[POWER]
(Code)
101: Adjustment mode (05)
102: Setting mode (08)
(Code)
103: PM support mode
104: Stored information of pixel counter (toner cartridge reference)
105: Stored information of pixel counter (service technician reference)
106: Error history (Maximum 1000 items)
107: Error history (Latest 80 items)
108: Firmware update log (Maximum 200 items)
110: Power-ON/OFF log (Maximum 100 items)
111: Version list
114: Total counter list
121: (05) adjustment value difference
122: (08) setting value difference
[Digital keys]
Key in the first
code to be printed
[Digital keys]
Key in the last
code to be printed
[POWER]
OFF/ON
(Exit)
[START]
List starts to
be printed
[START] [START]
[9][START]
[POWER]
(Code)
201: Adjustment mode (05)
202: Setting mode (08)
(Code)
203: PM support mode
204: Stored information of pixel counter (toner cartridge reference)
205: Stored information of pixel counter (service technician reference)
206: Error history (Maximum 1000 items)
208: Firmware update log (Maximum 200 items)
210: Power-ON/OFF log (Maximum 100 items)
211: Version list
212: Engine firmware log * Manufacture Purpose Only
214: Total counter list
221: (05) adjustment value difference
222: (08) setting value difference
223: Job log/Message log
300: All CSV files
[Digital keys]
Key in the first
code to be printed
[Digital keys]
Key in the last
code to be printed
[POWER]
OFF/ON
(Exit)
Connect
USB
Disconnect
USB
[START]
List starts to
be printed
[START] [START]
To Next Page
Loading...
