e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 244
4.10.42 ADU motor-2 (M8)
(1) Take off the TRU waste toner transport drive
section.
P. 4-160"4.7.21 TRU waste toner auger
drive section"
(2) Disconnect a connector from the ADU motor-
2.
(3) Remove 2 screws and then take off the ADU
motor-2 and a belt.
Notes:
When installing the motor, set the belt
securely to the ADU motor-2 and the pulley.
Fig. 4-709
(4) Remove 2 screws and then take off the
bracket from ADU motor-2.
Fig. 4-710
To Next Page
Loading...
