Toshiba E-Studio 5540c - Intermediate Transport Roller

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 271
4.11.17 Intermediate transport roller
(6) Lift the guide. Take off the original
registration roller.
Notes:
When installing the original registration roller,
refix the loosened screw and tighten the belt
tension.
Fig. 4-790
(1) Take off the reading start guide unit.
 P. 4-263"4.11.10 Reading start guide unit"
(2) Loosen 1 screw.
Fig. 4-791
(3) Remove 1 screw.
Fig. 4-792