Toshiba E-Studio 5540c - RADF Left Cover; Original Tray

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 260
4.11.5 RADF left cover
4.11.6 Original tray
(1) Remove the RADF front cover.
 P. 4-257"4.11.2 RADF front cover"
(2) Remove the RADF rear cover.
 P. 4-258"4.11.3 RADF rear cover"
(3) Remove 2 screws and take off the RADF left
cover.
Fig. 4-756
(1) Take off the paper feeder unit.
 P. 4-266"4.11.12 Paper feeder unit"
(2) Disconnect 1 connector from the RADF
board.
Fig. 4-757
(3) Remove 1 screw and take off the bushing.
Fig. 4-758
LED3