11
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
FIRMWARE UPDATING
11 - 21
[E] Examples
Examples of update are as below. In this section, the procedure is explained by focusing on a
differential items update.
No. Operation Update procedure When update has failed
1
Updating from
L2.0 to L2.1
Perform a differential items
update from L2.0 to L2.1.
Perform a standard update to L2.0
which is the base version of L2.1 before
carrying out a differential items update
to it.
2
Updating from
L2.0 to L2.2
Perform a differential items
update from L2.0 to L2.2.
(Updating to L2.1 is
unnecessary.)
Perform a standard update to L2.0
which is the base version of L2.2 before
carrying out a differential items update
to it.
3
Updating from
L2.1 to L2.12
Perform a patch update from
L2.1 to L2.12.
Perform a patch update from L2.1 to
L2.12.
4
Updating from
L2.2 to L3.0
Perform a standard update
from L2.2 to L3.0.
Perform a standard update to L3.0.
5
Updating from
L2.1 to L3.1
Perform a standard update
from L2.1 to L3.0 which is the
base version of L3.1 before
carrying out a differential
items update to it.
Perform a standard update to L2.0
which is the base version of L2.1.
Perform a standard update to L3.0 and
then carry out a differential items
update to L3.1.
No.1
No.2
No.3
No.4
No.5
Differential
items L1.1
Differential
items L2.1
Patch L2.12
Differential
items L2.2
Base version
L3.0
Differential
items L3.1
Base version
L2.0
To Next Page
Loading...
Need help?
General
