e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 286
4.11.31 Original pickup solenoid (SOLR1)
(1) Take off the RADF rear cover.
P. 4-258"4.11.3 RADF rear cover"
(2) Disconnect 1 connector.
(3) Remove 2 screws and take off the original
pickup solenoid.
Fig. 4-833
(4) Remove 2 screws and take off the bracket
from the original pickup solenoid.
Fig. 4-834
Notes:
When installing the solenoid, check if it is
aligned with the position indicated in the
figure. (The scale is longer in the center.)
Fig. 4-835
To Next Page
Loading...
