Toshiba E-Studio 5540c - Feed;Transport Drive Unit; Transport Motor-1

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 70
4.5.36 Feed/transport drive unit
4.5.37 Transport motor-1 (M40)
(1) Open the PFC board case.
 P. 9-8"9.1.9 PFC board case"
(2) Disconnect 3 connectors and remove 4
screws. Then take off the feed/transport
drive unit.
Fig. 4-203
(1) Take off the feed/transport drive unit.
 P. 4-70"4.5.36 Feed/transport drive unit"
(2) Remove 4 screws and a plate.
Fig. 4-204
(3) Remove 2 screws and then take off the
transport motor-1.
Fig. 4-205
Feed/transport drive unit
Plate
Transport motor-1