6
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
6 - 59
6.3.6 Maximum toner density adjustment (OHP)
The maximum toner amount adhering can be controlled.
<Adjustment Mode (05)>
<Procedure>
The procedure is the same as that of P. 6-58"6.3.4 Adjustment of faint text".
Notes:
The larger the value is, the more frequently fusing offsetting occurs.
Code Paper type Remarks
8145 OHP film
(600dpi)
The smaller the value is, the toner amount adhered decreases of the
high density area (ex. prevention of fusing offsetting, etc.).
Acceptable values: 0 to 255
8149 OHP film
(1200dpi)
To Next Page
Loading...
