Toshiba E-Studio 5540c - Lens Cover; SLG Board Cooling Fan

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 16
4.3.2 Lens cover
4.3.3 SLG board cooling fan (F1)
(1) Take off the original glass.
 P. 4-15"4.3.1 Original glass"
(2) Release 1 clamp and disconnect 1
connector.
Fig. 4-42
(3) Remove 5 screws and take off the lens
cover.
Fig. 4-43
(1) Take off the lens cover.
 P. 4-16"4.3.2 Lens cover"
(2) Remove 2 screws and disconnect 1
connector.
(3) Take off the SLG board cooling fan.
Fig. 4-44
Clamp
Lens cover
SLG board cooling fan