4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 291
4.11.36 RADF opening/closing sensor (SR15)
4.11.37 Original empty sensor (SR3)
(1) Take off the RADF rear cover.
P. 4-301"4.11.54 RADF board bracket"
(2) Open the RADF and disconnect 1 connector.
(3) Release 2 latches and take off the RADF
opening/closing sensor.
Fig. 4-848
(1) Open the original jam access cover.
(2) Remove 4 screws and take off the sensor
bracket.
Fig. 4-849
(3) Disconnect 1 connector. Release 2 latches
and take off the original empty sensor.
Fig. 4-850
To Next Page
Loading...
