e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
11 - 20
Below is an example of the changes of the LCD screen during update.
During the update, "Update in progress" is displayed on the right of each item. After it is completed,
"Completed" is displayed there. Example screens of the system firmware update are as follows, and
these are the same for other firmware.
As for a patch update, "Patch Update Successful Restart the MFP" is displayed instead of "Complete"
when the update is completed.
System ROM
Fig.11-13
To Next Page
Loading...
